TELES VoIP Box BRI Series, Reference Manual

Page: 134 / 226

6 Signaling and routing features
VoIPBox DSL / VoIPBox BRI – version 21.0.009 Page 134
6.11.3 Changing cause values
It is possible to group cause values together into a single de-
fined cause value so that rejected calls can be handled in a
specified manner by the PBX sending the call to the VoIPBox.
The following cause value groups can be defined in the
pabx.cfg
.
Group 0 cause values
All connections that are rejected with a group 0 cause value
(
0x80-0x8f
) can be mapped to a single cause value by enter-
ing
TranslateG0Cause=<cause>
, whereby
<cause>
repre-
sents a cause value in hexadecimal form between 00 and 7f
(or 80 and ff in most significant bit-notation).
Group 1 cause values
All connections that are rejected with a group 1 cause value
(
0x90-0x9f
) can be mapped to a single cause value by enter-
ing
TranslateG1Cause=<cause>
, whereby
<cause>
repre-
sents a cause value in hexadecimal form between 00 and 7f
(or 80 and ff in most significant bit-notation).
Group 2 cause values
All connections that are rejected with a group 2 cause value
(
0xa0-0xaf
) can be mapped to a single cause value by enter-
ing
TranslateG2Cause=<cause>
, whereby
<cause>
repre-
sents a cause value in hexadecimal form between 00 and 7f
(or 80 and ff in most significant bit-notation).
Group 3 cause values
All connections that are rejected with a group 3 cause value
(
0xb0-0xbf
) can be mapped to a single cause value by enter-
ing
TranslateG3Cause=<cause>
, whereby
<cause>
repre-
sents a cause value in hexadecimal form between 00 and 7f
(or 80 and ff in most significant bit-notation).