TeleEye RX800 Series, User Manual Lite

Page: 163 / 169

Appendix G : Audit Trail Log Description
A. Audit Trail Log Description of Setting Log
Event short form: [Event]
ARM Arm/disarm input
Secu Switch Security switch input
Alarm Alarm sensor input
Motion Motion
Video Loss Video loss
Disk Usage Disk usage
Sys Tamper System tamper input
Power Fail Power failure input
HDD Fault HDD fault
Sys Restart System restart
B. Setting Log Setting Column Table
Setting Description
Camera Installed Install / uninstall camera
Camera Name Change camera name
Date Time Position Change OSD clock position
PTZ Supported Support PTZ camera or not
PTZ Pan Speed Change PTZ camera pan speed
PTZ Tilt Speed Change PTZ camera tilt speed
PTZ Pan Duration Change PTZ camera pan duration
PTZ Tilt Duration Change PTZ camera tilt duration
PTZ Zoom Duration Change PTZ camera zoom duration
PTZ Focus Duration Change PTZ camera focus duration
PTZ Iris Duration Change PTZ camera iris duration
PTZ Additional Duration Change PTZ camera additional duration
PTZ Washer Duration Change PTZ camera washer duration
PTZ Wiper Duration Change PTZ camera wiper duration
PTZ Patrol Speed Change PTZ camera patrol speed
PTZ Dwell Time Change PTZ camera dwell time
PTZ Driver Change PTZ driver
PTZ Baud Rate Change PTZ camera baud rate
Camera Name Enabled Show / hide OSD camera name
Sequential Time Change sequential mode camera switch time
Sequential Cam Change camera displayed in sequential mode
Default Display Change default display mode
OSD Font Color Change OSD font color
Rec Frame Rate Change recording frame rate
Schedule Rec Enabled Enable / disable schedule recording
Disk Mode Change recording disk mode
Video Quality Change recording quality
Image Size Change recording resolution