TeleEye RX800 Series, User Manual Lite

Page: 97 / 169

For Exit Zone:
The exit delay is the period of time for leaving a surveillance zone without making false alarm (i.e. Alarm
1 to Alarm 4). The purpose is to let the user / installer have enough time to leave the surveillance zone
after the video recording server is armed. User / installer can set the delay time for each alarm. Note that
if user enables recording action, recording will be activated when an alarm is triggered during exit delay.
The detail description is shown as follows:
1. User arms the system
2. The alarm is set at exit delay and timer of all alarms begin
3. The 1st trigger is made by Alarm 1 (i.e. user leaves the surveillance zone)
4. 2nd, 3rd and 4th triggers are made respectively
5. User turns on the security switch or waits for all alarm exit delays to expire
For example, if the time for leaving the surveillance zone is about 8 minutes, user should adjust the delay
time so that Delay 1 = leaving time between video recording server and Alarm 1, Delay 2 = leaving time
between video recording server and Alarm 2, Delay 3 = leaving time between video recording server and
Alarm 3 and Delay 4 should be 8 minutes. The alarm will be activated after the exit delay expired.