TeleEye RX800 Series, User Manual Lite

Page: 164 / 169

Retention Enabled Enable / disable recording retention
Retention Period Change retention period
Retention Time Change retention time
Rec Audio Channel Change recording audio channel
Switch Name Change switch name
Switch Type Change switch type
Date Time Change date time
Time Zone Change time zone
Auto IP Enable / disable auto IP
IP Address Change IP address
Port Change port
Subnet Mask Change subnet mask
Gateway Enabled Enable / disable gateway
Gateway Change gateway
Auto DNS Enable / disable auto DNS
DNS Change DNS address
sureLINK Enabled Enable / disable sureLINK
sureLINK Address Change sureLINK address
sureLINK Refresh Rate Change sureLINK refresh rate
Throughput Change throughput
[Event] Enabled Enable / disable the event
[Event] Tamper Type Change the event tamper type
[Event] Zone Change the event zone type
[Event] Entry Delay Change the event entry delay
[Event] Exit Delay Change the event exit delay
Arm State Change arm state
Associate Switch 1 Enable / disable arm/disarm associate switch 1
Secu Switch On State Change security switch on state
Associate Switch 2 Enable / disable security switch associate switch 2
Alarm Name Change alarm sensor name
Alarm Sensor Type Change alarm sensor type
Motion Block Change motion detection block
Motion Sensitivity Change motion detection sensitivity
Motion Level Change motion detection level
Motion Area Change motion detection area
Sys Tamper Sensor Type Change system tamper sensor type
Power Fail Sensor Type Change power failure sensor type
Disk Usage Level Change disk usage warning level
[Event] Recording Enable / disable recording action of the event
[Event] Rec Cam Change event recording camera
[Event] Rec Frame Rate Change event recording frame rate
[Event] Rec Duration Change recording duration after event clear
[Event] Switch Enable / disable switch action of the event
[Event] Switch Mask Change switch associated to the event
Switch Latch Duration Change switch latch duration
Switch Delay Change switch action delay
[Event] Dialback Enable / disable dialback action of the event
Dialback IP Change dialback IP address
Dialback Port Change dialback port