5.4.4.4.Motion
Motion event is triggered when movement is detected inside the surveillance area of a camera.
1. Go to [
Server
], select [
Event Matrix
]
[Event
]
[Motion
].
2. Click on [
Setting
] to pop up [
Motion Setting
] menu. Left click mouse and drag to select the
surveillance area or right click mouse and drag to deselect the area. Outlines of selected blocks will be
displayed in red colour. Blocks filled with red colour means motion is detected.
3. Click on [
Zone Type
] to change the operational zone.
5.4.4.5.Video Loss
Video loss event is triggered when the video recording server receives no signal from the camera. A blue
screen would be displayed when this happens.
1. To enable video loss detection, go to [
Server
]
[
Event Matrix
]
[Event
]
[Video loss
].
5.4.4.6.System Tamper
System tamper prevents someone from breaking into the cabinet and destroying the video recording
server.
1. To change the event settings, go to [
Server
]
[
Event Matrix
]
[Event
]
[System Tamper
].
5.4.4.7.Power Failure
This event is triggered when any power failure condition is detected.
1. To change the event settings, go to [
Server
]
[
Event Matrix
]
[Event
]
[Power Failure Input
].
Summary of Contents for RX800 Series
