TeleEye RX800 Series, User Manual Lite

Page: 89 / 169

Arm/Disarm Mode
TeleEye RX supports 3 different modes of arm/disarm operation:
-
Hardware: Use Arm input to arm/disarm, suitable for local operation
- Software: Use software to arm/disarm, suitable for remote operation
- Schedule: Follow preset schedule to arm/disarm, suitable for unmanned location
Under software and schedule mode, the security switch is not applicable.
There are 2 types of arm schedules:
- Normal Schedule: User can set the arm period in terms of weekday.
The system would arm according to this weekly
schedule.
- Holiday Schedule: User can set the arm date and period for specially
handled holiday. If the date is set to holiday
schedule, it will follow holiday schedule instead
of normal schedule.
Arm/Disarm Tamper Type
Arm/Disarm tamper event triggers if someone cuts the wire between the arm/disarm input and the video
recording server. This event can be triggered once the wire is being cut. Arm/Disarm tamper type has
choice of none, SEOL and DEOL.
Arm State
If arm state is set to close, it indicates arm of TeleEye RX when the state of the circuit is close and disarm
of TeleEye RX when the circuit is open. Oppositely, if arm state is set to open, it indicates arm and disarm
of TeleEye RX when the state of the circuit is open and close respectively.
Physical Configuration for Arm/Disarm
The arm/disarm input and ground of TeleEye RX video recording server needs to connect to a control unit
which is commonly a switch or password panel for arm/disarm input.