TeleEye RX800 Series, User Manual Lite

Page: 96 / 169

Example of Entry/Exit Zone WITH Security Switch Usage
For Entry Zone:
The entry delay is the period of time between entering the surveillance zone and reaching the video
recording server. In order to disarm the system for maintenance or repair, user / installer needs to turn off
the security switch and enter the surveillance zone. The delay timer starts from the 1st trigger by the 1st
alarm sensor (i.e. Alarm 4). Note that if user enables recording action, recording action is automatically
activated during entry delay.
The detail description is shown as follows:
1. User turns off security switch
2. The alarm is set at entry delay
3. The 1st trigger is made by Alarm 4 (i.e. user enters the surveillance zone and the entry delay time
begins)
4. 2nd, 3rd and 4th trigger are made and each entry delay starts respectively
5. User disarms the system for maintenance
For example: If the time for going from security switch to video recording server is about 8 minutes,
Delay 4 should be around 8 minutes, while Delay 3 should be longer than the time for going from security
switch to Alarm 3, and so on.