TeleEye RX800 Series, User Manual Lite

Page: 93 / 169

Start Time Set the start time of new schedule
End Time Set the end time of new schedule
Add Add the new holiday arm schedule
4.4.3.2.
Security Switch
It is an input to the video recording server for wiring a security switch. The purpose of the security switch
is to terminate the exit delay for exit zone alarm. If the security switch is on and the system is armed, all
exit delay will be terminated. If the security switch is off and an entry alarm is triggered, entry delay will
start.
Security Switch Tamper Type
Security switch tamper event triggers if someone cuts the wire between the security switch input and the
video recording server. This event can be triggered once the wire is being cut. Security switch tamper type
has choice of none, SEOL and DEOL.
On State
If security switch on state is set to close, it indicates security switch on and off of TeleEye RX when the
state of the circuit is closed and open respectively. Oppositely, if security switch on state is set to open, it
indicates security switch on and off of TeleEye RX when the state of the circuit is open and closed
respectively.
Physical Configuration for Security Switch
The security switch input and ground of TeleEye RX video recording server needs to connect to a control
circuit which is commonly the lock of the surveillance area for security switch input.
[ Main Menu ]  [ Event Handler ]  [ Security Switch ]