5.4.5.6.Buzzer
If an event is associated with buzzer action, a “Beep” sound will be produced to draw nearby operator’s
attention when this event is triggered.
1. To change buzzer settings, go to [
Server
]
[
Event Matrix
]
[Action
]
[Buzzer
].
2. To enable the action, go to [
Server
]
[
Event Matrix
]
[Event
]. Choose an event and click on
[
Buzzer
] column.
5.4.5.7.Event LED
If an event is associated with LED action, the LED
built on the front panel of TeleEye RX will blink
when this event is triggered. This action is enabled by default.
1. To disable the action, go to [
Server
]
[
Event Matrix
]
[Event
]. Choose an event and click on
[
LED
] column.
5.4.5.8.Live Camera
If an event is associated with live camera action, real time live video of pre-selected cameras will be
displayed immediately when this event is triggered.
1. To change the settings go to [
Server
]
[
Event Matrix
]
[Event
]. Choose an event and click on
[
Live
] column.
5.4.5.9.PTZ
If an event is associated with PTZ camera action, associated PTZ camera will move to preset position
when this event is triggered.
1. To change the settings go to [
Server
]
[
Event Matrix
]
[Event
]. Choose an event and click on
[
PTZ
] column.
Summary of Contents for RX800 Series
