TeleEye RX800 Series, User Manual Lite

Page: 162 / 169

Appendix F : General Terms Discussion
Before you start configuring the video recording server, you may need to know some of the terms and
information used in the video recording server.
Registration Checking
When this feature of TeleEye RX is enabled, users need to do the registration in the remotely connecting
software (e.g. JAVA web page, TeleEye sureSIGHT) for authorization before the video recording server
can be used. This option can be applied to improve the security protection for the organisation when
higher security level is required. If the video recording server is decided to open for public use, this
feature can be disabled so that public users do not need to register for viewing live video remotely
through network.
Site Monitoring Method
There are two methods to link up with the video recording server to view video:
-
TCP/IP in LAN
- TCP/IP on the Internet using Broadband and Internet Router
Depending on the connection method chosen, follow Section 3 to configure the video recording server
before use so as to make it function properly.
The built-in web server or TeleEye surveillance applications (e.g. sureSIGHT) contains all the settings for
different remote video monitoring methods. Different connection methods may have different settings,
and some of the setting configured in one connection method may not be applicable to other method.
It is recommended that the above items should be configured before the first time you use the video
recording server no matter which connection method you use. The setup and configuration procedures are
discussed in Section 3: Setup for Local and Remote Monitoring.