Teledyne T3PS13206P, User Manual, Page: 155 / 197

REMOTE CONTROL
155
power trigger (>P, <P, =P) is selected, it is
required to set parameter <value> (the specified
voltage, current or power value of the trigger
condition).
Example :TRIGger:OUT:CONDition D0,>V,10
Sets the trigger condition from the trigger output
of D0 data line as output voltage>10V.
:TRIGger:OUT:CONDition? {D0|D1|D2|D3|D4}
Description
Queries the trigger condition from the trigger
output of the specified data line.
Example :TRIGger:OUT:CONDition? D0
Returns the trigger condition from the trigger
output of D0 data line.
:TRIGger:OUT[:ENABle] {D0|D1|D2|D3|D4},{ON|OFF}
Description
Enables or disables the trigger output function of
the specified data line.
Parameter
After enabling trigger output function, the
specified data line will, when the output signal of
the specified controlled channel meets the set
trigger condition, output the specified level or
square wave based on the setting of output signal.
Example :TRIGger:OUT D0,ON
Enables the trigger output function of D0 data
line.