Teledyne Princeton Instruments PI-MAX 3, System Manual

Page: 62 / 250

62 PI-MAX
®
3 System Manual Issue 2
16. Click on the Acquire button to start Acquire mode. See Figure 6-14 .
• If an image is displayed, you have confirmed that the PI-MAX3 can acquire an
image;
• If the image is out of focus, reposition the target and/or rotate the lens and click
on Acquire to confirm that the focus has changed;
REFERENCES:
For additional information about focusing the PI-MAX3
system, refer to:
• Appendix E, Mounting and Focusing C- and F-Mount
Lenses
, on page 221;
• Appendix G, Spectrograph Adapters , on page 227.
• If the image is upside down, you need to change the orientation via the Online
Corrections expander.
Figure 6-14: Typical LightField View Tab with Image
17. Once it has been confirmed that PI-MAX3 is acquiring images properly, turn the
PI-MAX3 I.I.T. switch to off.
18. Close the WinX/32 application.
19. If the PI-MAX3 will not be used with the lens, replace the C-mount lens with the
screw-in dust cover provided with the C-mount adapter.
If a different adapter will be used, install the desired adapter. Refer to
Appendix F,
C-, F-, and Spectroscopy- Mount Adapters , on page 223 for complete information.
NOTE:
Always use the adapter's dust cover whenever the PI-MAX3
is not being used.
4
4
11-
0129
_0
027