Installation, Outdoor HPO PowerMAX System
215861 REV C
31
2.1.10.9 Optional Mute Switch Cable
The mute switch cable is used with systems utilizing the optional Maintenance Switch.
This cable is part number L215628-2, and has labels affixed near the connectors to
identify to which port that connector should be plugged. See
Figure 2-29
.
A mounting bracket was shipped attached to the cable end labeled Switch Control.
Secure the mounting bracket to the uni-strut frame on the RF Output end of the system
to the right of the maintenance switch, so that the open connector faces up, as shown
in
Figure 2-30
.
Plug the circular MIL-connectors into Port J7 of the Outdoor SSPA Controllers and the
socket of the Maintenance Switch.
Figure 2-29: Optional Mute Switch Cable
Figure 2-30: Install Cable Bracket to Uni-Strut Frame
SSPA CONT 1
J7
SSPA CONT 2
J7
MAINT
SWITCH
L215628-2
SWI
T
C
H
CONTRO
L
Mounting bracket
secured to cable
bulkhead
