26
215861 REV C
Installation, Outdoor HPO PowerMAX System
2.1.10 Connect Cables
Install the following sets of cables as described. All semi-rigid coaxial cable is pre-
formed and should not be re-shaped or otherwise altered.
2.1.10.1 Forward Sample In
This cable is a semi-rigid coaxial cable labeled W10 that connects between the SMA
connector of the forward sample off the crossguide coupler at the system output and
Port J13 of the RF Distribution Box.
Do not bend or otherwise alter the shape of this cable during installation.
2.1.10.2 Reflected Sample In
This cable is a semi-rigid coaxial cable labeled W9 that connects between the SMA
connector of the reflected sample off the crossguide coupler at the system output and
Port J14 of the RF Distribution Box.
Do not bend or otherwise alter the shape of this cable during installation.
2.1.10.3 RF Distribution Cables
The RF Distribution Cables are flexible coaxial cables used to distribute the RF signal
from the RF Distribution Box to each of the SSPA Modules in the system.
Each of the cables are labeled, and should be plugged in to the appropriate connector.
See
Table 2-1
.
Table 2-1: RF Distribution Cable Connections, 8-way System
Label
SSPA Module
Label
SSPA Module
W1
SSPA 1.1
W5
SSPA 2.1
W2
SSPA 1.2
W6
SSPA 2.2
W3
SSPA 1.3
W7
SSPA 2.3
W4
SSPA 1.4
W8
SSPA 2.4
