Installation, Outdoor HPO PowerMAX System
215861 REV C
15
Figure 2-8
shows how to connect a L215716 bracket to the bottom of the array.
Count down two holes from the top of the uni-strut frame and install the top waveguide/
combiner array mounting bracket as shown in
Figure 2-9
. Install the same hardware
configuration in the bottom waveguide/combiner array mounting bracket.
Note:
The waveguide/combiner arrays are labeled “SSPA 1.1” and
“SSPA 2.1”. Make sure to install the waveguide/combiner array to the
proper amplifier module, as labeled.
Figure 2-8: Install Waveguide/Combiner Array Mounting Bracket (Bottom)
Figure 2-9: Mount Waveguide/Combiner Arrays to Uni-Strut
