28
215861 REV C
Installation, Outdoor HPO PowerMAX System
2.1.10.5 SSPA Module M&C Cables (L213827-1, -2)
Communication for monitor and control purposes between the SSPA Controllers and
each of the connected amplifiers is established through the Monitor & Control Cables.
These cables connect to Port J4 of the SSPA Controller, and to Port J4 of each SSPA
in the controller’s array of amplifiers. A label is affixed near each connector that de-
scribes the port to which it should be attached.
Connect the female sure seal connector on L213827-1 to the male sure seal connector
of L213827-2.
The cable used is part number L213827-1 for the SSPA modules connected to Control-
ler 1, and part number L213827-2 for the SSPA modules connected to Controller 2.
See
Figure 2-25
.
Figure 2-25: SSPA Module M&C Cable, L213827-1/-2
