manualshive.com logo in svg

Teledyne 200E, Instruction Manual, Page: 23 / 302

Share
Download
Teledyne 200E Instruction Manual Download Page 23

Specifications, Approvals and Warranty 

Model 200E Instruction Manual 

THE WARRANTIES SET FORTH IN THIS SECTION AND THE REMEDIES THEREFORE ARE 

EXCLUSIVE AND IN LIEU OF ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS 
FOR PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR 

IMPLIED. THE REMEDIES SET FORTH IN THIS SECTION ARE THE EXCLUSIVE REMEDIES 
FOR BREACH OF ANY WARRANTY CONTAINED HEREIN. T-API SHALL NOT BE LIABLE FOR 

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR RELATED TO THIS 
AGREEMENT OF T-API'S PERFORMANCE HEREUNDER, WHETHER FOR BREACH OF 
WARRANTY OR OTHERWISE. 

Terms and Conditions 

All units or components returned to T-API should be properly packed for handling and 

returned freight prepaid to the nearest designated Service Center. After the repair, the 
equipment will be returned, freight prepaid. 

8 

044100102 Rev A 

Summary of Contents for 200E















































































































































































































































































































Reviews:

No comments