Telecor VS1, Installation, Configuration & Operating Manual

Page: 162 / 281

VS1 Installation, Configuration & Operating Guide 151
milliseconds and less than the Flash Time. Flash Time is entered in one hundredths of a second (80
= 800 milliseconds).
AutoPage Time : AutoPage Time tells the system how long to wait from the time a call begins
ringing at an extension before it issues its first AutoPage. By default, AutoPage Time is set to –1 ,
which is 10 seconds. After 10 seconds expire, a page is made announcing “Call waiting” and the
extension where the call is ringing. You can set AutoPage Time from 1–999 seconds.
Note Make sure the AutoPage Time is set to a shorter amount of time than the RO Time.
Otherwise, calls automatically rollover to the RO Port before the message is played.
AutoPage Zone : The AutoPage Zone is the Page Zone index number where automatic paging
occurs. By default, AutoPage Zone is set to 1 . You can set AutoPage Zone from 1 through 20.
Auto-Select
Auto Select determines which line is selected on multi-line phones such as the DP200 Display
Phone and the Connect CTI client application. Auto Select does not affect single line phone
operation. By default, the
Line A option is checked. Three options are available:
None – phone user must pickup the receiver and press the 'line' button he wishes to use Line 1
through 5
Line A – the line is selected automatically when the handset is lifted or the speakerphone button is
pressed.
Ringing – the ringing line is automatically selected when the handset is lifted or the speakerphone
button is pressed.
Note The Line A option must be selected for Telecor Connect using PCOM port types for the
phone to function when the computer is turned off.
Properties
Auto Hold (only for DP200 phones): Automatically places a call on hold when a DP200 display
phone user presses another line appearance button to answer a call. If Auto Hold is disabled, the first
line appearance call is disconnected when the new call is connected. This option does not apply to
single line phones. By default, Auto Hold is enabled.
Auto Page : Works in conjunction with AutoPage Time and AutoPage Zone. If AutoPage is
enabled, the values set up in AutoPage Time and AutoPage Zone take effect. The default Auto Page
Time is 10 seconds.
Hands Free (only for DP200 display phones): When a user calls a DP200 display phone that has
Hands Free enabled, the phone automatically connects to the call without ringing and is put on the
speakerphone. A two-beep tone is heard before the call is put on the speakerphone to alert the
station user. Hands Free only works for internal extension-to-extension calls. It does not work when
transferring calls.
Exec Priv : Enables station (except Telecor Attendant stations) to monitor conversations on other
extensions. This is a useful feature in evaluating call handling techniques and customer service. The
extension monitoring the call can listen to both ends of the conversation, but cannot be heard. Both
parties of a call being monitored hear a beep tone every 10-15 seconds to alert them that the call is
being monitored. To use this feature a station user dials
# # 0 (or clicks the Monitor button in