Telecor VS1, Installation, Configuration & Operating Manual, Page: 155 / 281

144 VS1 Editor Configuration Application
•
At this point, the new Port Configuration appears with all the ports unassigned.
3. In the Configuration drop-down box, select the Configuration whose information will be
copied.
4. Click Copy .
•
The Copy Config dialog box appears.
Copy Configuration
dialog box
5. In the Copy To: box select the newly-created Configuration that information will be copied to.
6. Click OK .
7. The Confirm window appears asking if you want to copy over the existing information in your
unassigned configuration. Click Yes .
Replicating Individual Port Settings
To save time when configuring individual ports, all selections from a configured port can be
replicated to a port of the same type – in the same configuration or other configurations -- leaving
you with only minimal changes to the new port. Complete the following steps:
1. Select a configured port.
2. Click Replicate .
•
The Replicate Target dialog box appears. Two options are available:
Field to other ports : Copies selected field to same port types in the configuration.
Fields to other configurations : Copies selected field to the same port number in other
configurations. The targeted port number must be set to the same port type as the source.