Telecor VS1, Installation, Configuration & Operating Manual

Page: 227 / 281

VS1 Installation, Configuration & Operating Guide 219
modem send { command
} ....................................................................................... Sends AT commands to be sent to the modem
pause { n }
................................................................................................. Pauses a command script for amount of time (seconds)
relay {1|2} { time }
..................................................... Turn on designated relay for specified time (hundredths of seconds)
ren { filename } { newfilename }
........................................................................................................................... Renames file
rop 1
.................................................................................................................... Causes incoming calls to ring over pager outputs
rop 0
.......................................................................................................................................... Turns off ring over pager command
set
......................................................................................................................................................... Shows current system settings
set aavolin={ n }
.................................................. Adjusts inbound volume for COs connected to AA or VM to specified level
set aavolout={ n } ...................
Adjusts outbound volume for COs connected to AA or VM to specified level
set animode={0|1} .................................................... Reserved. Do not change.
set autopagerepeat={ n }
...................................................................... Sets time interval (seconds) before AutoPage repeats
set autopagetime={ n }
............................................................................................. Sets time (seconds) of the initial AutoPage
set coholdtime={ n }
....................................... Sets system default time (seconds) for parked and held calls before ringback
set dialmindigits={ n }
............................................................. Determines minimum number of digits that must be dialed
set dialtime1={ n }
................................. Sets the time (seconds) after each dialed digit before assuming dialstring complete
set dialtime2={ n } .................................... Sets the time (seconds) the system will wait before assuming dialstring complete
set dialtimerdigits={ n }
......................................... Determines how many digits must be dialed before DialTime2 begins
set dndtime={ n }
..................................................................................... Determines time (hours) for DND on standard phones
set dndtime=0 ............................................................................................................. Turns DND timer off for standard phones
set loop{ n }={ file }
........................................................................................... Specifies voice file associated with a loop tape
set ring0={ n }
............................................................................ Determines length (hundredths of seconds) of ring to be valid
set ring1={ n } ............................................... Determines length (hundredths of seconds) of time before waiting for next ring
set ring2={ n }
..................................... Determines length (hundredths of seconds) of time before recognizing next valid ring
set smdrmode27={0|1} ...............................
Changes number of year digits in SMDR Date fields.
show acd { acd number } ........................................................................................................ Displays status for specified ACD
show events
........................................................................................................... Displays remaining scheduled events for week
show ports { file }
....................................................................................................... Displays port configuration information
shutdown { n } .................................................................................................................. Resets system in specified time (minutes)
shutdown idle .............................................................
Turns the system off
stat
.................................................................................................................................................................. Displays Process Status
stop ................................................................................................................................................................... Stops operating system
sysinfo
.................................................................................................................................................. Displays system information
time
...................................................................................................................................................................... Displays system time
t1 comm {0|1}
.............................................................. Displays version and communication stats about T1 card 1 (0) or 2 (1)
t1 setup {0|1} ..........................................
Displays T1 settings for T1 card 1 (0) or 2 (1)
t1 stat 0|1 ....................................................
Displays status of specified T1 card
vm { extension } ......................... Displays voice mail information for specified extension. Press enter to view additional stats
vmaint scan [ forward to ]
............... Checks integrity of voice mail; forwards orphaned to specified extension or deletes
vmaint purge { extension |*} { daysold } [ forward to ]
........................... Purges voice mail to specified extension