ViTELiX
UC Phones for Microsoft
®
Office Communicator 2007
VX-100, VX-200, VX-200 duo
Quick User Guide
PHONE MODELS
PARTS DELIVERED
Base unit
Handset
Handset connection cable
USB cable
ASSEMBLY AND INSTALLATION
Connect the
handset
to the
base unit
using the
handset connection cable
Connect the
USB cable
to the
base unit
Make sure that your PC has one of the following
Microsoft operating systems:
Windows Vista
Windows XP
Plug the
USB cable
into the USB port on your PC.
Installation of the device drivers takes place
automatically and may take up to 30 seconds. If
installation does not complete successfully in 1
minute, then unplug the phone from the USB port
and then re-plug it.
MICROPHONE VOLUME ADJUSTMENT
User can increase or decrease the volume of the
Microphone using Windows capture mixer as
follows:
Open Control panel | Sound and audio devices |
Audio | Sound recording |
and select
Vitelix UC device
HANDSET VOLUME ADJUSTMENT
User can increase or decrease the volume of the
handset speaker using Windows capture mixer as
follows:
Open Control panel | Sound and audio
devices | Audio | sound playback |
and select
Vitelix UC device
VX-100:
Basic Model, no keypad
VX-200:
Enterprise model w/
Keypad and function buttons.
VX-200
duo
:
Dual mode phone,
VoIP or PSTN, w/ keypad, function
buttons and PSTN gateway.
ViTELiX VX-100, VX-20, VX-200 duo Quick User Guide Rev A. 5/2007
