manualshive.com logo in svg

Telecor VS1, Installation, Configuration & Operating Manual

Looking for a free User Manual for your VOCOlinc VS1? Look no further! Easily download the comprehensive manual from our website, manualshive.com, to unlock all the amazing features of your VOCOlinc VS1. Get the most out of your product with our detailed step-by-step instructions.

Share
Download
background image

iii

Copyright Notice

This manual and the software described in it are copyrighted, with all rights reserved.  Under the
copyright laws, neither this manual nor the software may be copied, in whole or in part, without the
written consent of Telecor Inc. except as provided in the applicable Telecor Inc. software license
agreement.  Under the law, copying includes translating into another language or format.

The software contains proprietary, confidential and unpublished information of Telecor Inc.  No use
or disclosure of any portion of this manual may be made without the prior express written consent of
Telecor Inc.  

© 2001-03 Telecor Inc. All Rights Reserved.

Printed in the United States of America.

Special Note for Government Users

This manual and the software described in it are provided with “Restricted Rights”.  Please refer to
the applicable Telecor Inc. license agreement for a complete description of the rights granted.

Manufacturer:

Telecor Inc.
1114 Westport Crescent
Mississauga, ON  L5T 1G1

Hardware Warranty

Please refer to the Telecor Inc. Registration Pak shipped with the
product.

Software Provided Under License

All software is provided pursuant to a license. Please refer to the Registration Pak for a complete
description of the rights granted.

Disclaimer

The Software and related documentation are provided “AS IS” and without warranty of any kind and
Telecor Inc. EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-
INFRINGEMENT.  TELECOR INC. DOES NOT WARRANT THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE
OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT
DEFECTS IN THE SOFTWARE WILL BE CORRECTED.  FURTHERMORE, TELECOR INC.
DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR
THE RESULTS OF THE USE OF THE SOFTWARE OR RELATED DOCUMENTATION IN
TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE.  NO
ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY TELECOR INC. OR A
TELECOR INC. AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN
ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.  SHOULD THE SOFTWARE
PROVE DEFECTIVE, YOU (AND NOT TELECOR INC. OR A TELECOR INC. AUTHORIZED
REPRESENTATIVE) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR, OR CORRECTION. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE,
SHALL TELECOR INC. BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OF OR INABILITY TO USE
THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF TELECOR INC. OR A
TELECOR INC. AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

The Software is not designed or licensed for use in in-line control of equipment in hazardous
environments such as operation of nuclear facilities, aircraft navigation or control, or direct life
support machines.

Telecor Inc. reserves the right to revise this publication and to make changes to its content, at any
time, without any obligation to notify any person or entity of such revisions or changes.

Trademarks

Telecor, the Telecor logo, VS1, CTIM, PCOM, Attendant, Call, and Connect are trademarks or
registered trademarks of Telecor Inc. Microsoft, MS-DOS, Windows, and Windows NT are
trademarks or registered trademarks of Microsoft Corporation. Predator 747 is a trademark of
American Predator Corporation. AT&T is a trademark of AT&T. Boca is a trademark of Boca
Research, Inc. Caldera and DR-DOS are registered trademarks of Caldera, Inc. G486VPC is a
trademark of Diamond Flower, Inc. GVC is a registered trademark of Global Village Communication,
Inc. Intel is a registered trademark of Intel Corporation. MaxTech is a registered trademark of
MaxTech Corporation. Megahertz, Sportster, and U.S. Robotics are registered trademarks of 3Com
Corporation. Novell is a registered trademark of Novell, Inc. Plantronics, SP, Supra, and TriStar are
trademarks or registered trademarks of Plantronics, Inc. Sound Blaster is a registered trademark of
Creative Technology, Ltd. TDK is a registered trademark of TDK Systems, Inc. Zoom is a registered
trademark and Zoom/FaxModem and ZoomCam are trademarks of Zoom Telephonics, Incorporated.

Patents

Patents Pending

Environmental Specifications

See the Hardware section for specific product specifications.

FCC Information

This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment, there is
a label that contains, among other information, the FCC Registration Number and Ringer
Equivalence Number (REN) for this equipment. The telephone company may require this
information prior to connection of this equipment.

This equipment requires USOC connectors listed below which are provided in the installation of
the Telecor VS1 business telephone system.

An FCC compliant telephone cord and modular plug is provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack which is Part 68 compliant. 

The REN is useful to determine how many devices you may connect to a single telephone line and
still have all of those devices ring when your number is called. In most, but not all areas, the sum
of all RENs per line should be five (5.0) or less. Your local telephone company can verify the
maximum REN per line for your calling area.

If this equipment causes harm to the telephone network, the telephone company may notify you in
advance that temporary discontinuance of service is required. If advance notice is not practical,
the telephone company will notify you of discontinuance as soon as possible. You will also be
advised of your right to file a complaint with the FCC.

The telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of your telephone equipment. If this happens, the telephone
company will provide advance notice so that you can modify your equipment to maintain
uninterrupted service.

If the trouble causes harm to the network, the telephone company may ask you to disconnect this
equipment from the network until the problem has been solved.  If you experience trouble with
this telephone equipment, please contact:

Telecor Inc., 1114 Westport Crescent, Mississauga, ON  L5T 1G1 Technical Support: (800) 464-
3274, Mississauga.  www.Telecor.com

You should not try to repair this equipment yourself. Changes or modifications not expressly
approved by Telecor Inc. could void your authority to operate the equipment.

This equipment may not be used on public coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. (Contact your state public utility commission
or corporation commission for information.)

This equipment is hearing aid compatible. 

Note:

 This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at their own
expense.

This equipment is capable of providing users access to interstate providers of operator services
through the use of access codes. Modification of this equipment by call aggregators to block
access dialing codes is a violation of the Telephone Operator Consumers Act of 1990.

Trade Name(s):

  Telecor

TM

 VS1

TM

 Business Telephone System

FCC Registration Number:

  5NBUSA-32975-MY-E

IC Certification Number:

 2403 6616 A

AC REN:

 (Base System) 1.3B and (T1) N/A

Connectors: 

(FCC USOC) RJ11C/21X/48 and (IC) CA11A/CA21A/CA81A

Authorized Network Ports:  

(FCC FIC) 02LS2 04DU9-BN/DN/1KN/1SN/1ZN and (IC)

LS/DI1/DI2/DI3

Trade Name:

  Telecor Cut-Over Box

FCC Registration Number:

  5NBUSA-32976-PX-N

AC REN:

  1.0B with CID;  0.0B without CID

Connectors:

  (USOC) RJ-11

Authorized Network Ports:

  (FIC) 02LS2

Trade Name:

  Display Phone

FCC Registration Number:

  FTZCHN-31227-KX-E

IC Certification Number: 

 2760 7997 A

AC REN:

  1.6B

Connectors:  

 (FCC USOC) RJ11C and (IC) CA11A

Authorized Network Port: 

 (FCC FIC) 02LS2 and (IC) LS

Additional Information

This document is current as of the date of publication. Refer to the Telecor Web site,

www.telecor.com

, for supplemental information.

For TVS Software 2.10
Man Rev: 

3

June 2003
E:\VS1 Documents\VS1 ICO\Telecor Manual

Summary of Contents for VS1


























































































































































































































































































Reviews:

No comments

Related manuals for VS1

Octopus F200 Operating Instructions Manual preview
F200
Brand: Octopus Pages: 131
Samsung DS 24D Quick Reference Manual preview
DS 24D
Brand: Samsung Pages: 6
jablotron SP-02 Manual preview
SP-02
Brand: jablotron Pages: 2
TANDBERG TCP 3015A Operating Instructions Manual preview
TCP 3015A
Brand: TANDBERG Pages: 12
Garmin GPSMAP 67 Owner'S Manual preview
GPSMAP 67
Brand: Garmin Pages: 60
Stuart Turner Mainsboost Plus Installation, Operation & Maintenance Instructions Manual preview
Mainsboost Plus
Brand: Stuart Turner Pages: 28
Sagem D142 User Manual preview
D142
Brand: Sagem Pages: 2
Alfa Laval PureBallast 135 Compact USCG System Manual preview
PureBallast 135 Compact USCG
Brand: Alfa Laval Pages: 412
Kirstein 00039500 User Manual preview
00039500
Brand: Kirstein Pages: 4
Sven SPS-818 Operation Manual preview
SPS-818
Brand: Sven Pages: 12
Trevi SB 8350TV User Manual preview
SB 8350TV
Brand: Trevi Pages: 24
Pyle Pro PDWM5500 Operating Instructions preview
PDWM5500
Brand: Pyle Pro Pages: 3
Aastra 9316CW Installation And User Manual preview
9316CW
Brand: Aastra Pages: 36
H & F Technologies Audio 2000's AMW6304U Owner'S Manual preview
Audio 2000's AMW6304U
Brand: H & F Technologies Pages: 6
Philips VOIP4331S/05 Quick Start Manual preview
VOIP4331S/05
Brand: Philips Pages: 2
Philips ThinkLink SE8881B/38 Specifications preview
ThinkLink SE8881B/38
Brand: Philips Pages: 3
Philips VOIP4331S/01 User Manual preview
VOIP4331S/01
Brand: Philips Pages: 45
Swyx SwyxPhone D565 Quick Start preview
SwyxPhone D565
Brand: Swyx Pages: 3

Brands by name

Popular brands

Load more brands