Tektronix RSA3300A, Service Manual

Page: 58 / 284

Performance Verification
4- 2
RSA3303A & RSA3308A Service Manual
Conventions
Throughout these procedures the following conventions apply:
H
Each test procedure uses the following general format:
Title of Test
Equipment Required
Prerequisites
Procedure
H
Each procedure consists of as many steps, substeps, and subparts as required
to do the test. Steps, substeps, and subparts are sequenced as follows:
1. First Step
a.
First Substep
H
First Subpart
H
Second Subpart
b. Second Substep
2. Second Step
H
Instructions for menu selection follow this format:
FRONT PANEL KEY
>
Side Menu Key
>
Submenu Key
.
For example, “Press MODE: DEMOD > Digital Demod > Constellation ”.
“MODE:
DEMOD
” indicates the
DEMOD
key in the MODE menu area on
the front panel.
H
In steps and substeps, the lead-in statement in italics instructs you what to
do, while the instructions that follow tell you how to do it.
In the example step below, “ Set the WCA280A analyzer controls ” by doing
“Press MODE: DEMOD > Digital Demod > Constellation ”.
Set the WCA280A analyzer controls:
Press MODE: DEMOD > Digital Demod > Constellation .
STOP
. The symbol at the left is accompanied by information you must read to do
the procedure properly.