Tektronix RSA3300A, Service Manual

Page: 123 / 284

Adjustment Procedures
RSA3303A & RSA3308A Service Manual
5- 13
The auto performance verification and calibration need the spurious floppy disks
for the signal generators (Items 1, 2, and 3). The following procedures measure
the spurious correction data for the specified signal generator and saves the data
to a floppy disk.
You must create or update the spurious correction file when one of these
conditions is met:
H
When you calibrate the analyzer initially
H
When you calibrate the signal generator
H
When you change the signal generator
H
When one year has elapsed from the last update of the file for the generator
NOTE
. Store the spurious correction file on the same floppy disk (Item 16) as the
flatness correction file for the signal generator.
Equipment
Required
One signal generator (Item 1, 2, or 3)
One 50
Ω
N-N coaxial cable (Item 9)
One GPIB cable (Item 10)
One RF attenuator (Item 12)
One floppy disk (Item 16)
Prerequisites Refer to page 5--1
1.
Prepare for the calibration: See the following figure for the hookup.
50
Ω
N-N coaxial cable
Output
Signal generator
RSA3303A/RSA3308A
GPIB cable
10 dB attenuator
Making Spurious
Correction Files