Tektronix RSA3300A, Service Manual

Page: 125 / 284

Adjustment Procedures
RSA3303A & RSA3308A Service Manual
5- 15
File Compatibility. The SG spurious file created in your analyzer can be used in
the other RSA and WCA models. Table 5--2 shows the file compatibility among
the products.
Table 5- 2: Compatibility of the spurious correction file
Product Created file name Frequency range File-compatible product
RSA2203A spurious_ignore2203.lst 15 MHz to 3 GHz RSA2203A only
RSA2208A spurious_ignore2208.lst 15 MHz to 8 GHz RSA2203A, RSA2208A
RSA3303A, WCA230A spurious_ignore3303.lst 15 MHz to 3 GHz RSA2203A, RSA3303A, WCA230A
RSA3308A, WCA280A spurious_ignore3308.lst 15 MHz to 8 GHz RSA2203A, RSA3303A, WCA230A,
RSA2208A, RSA3308A, WCA280A
RSA3408A spurious_ignore.lst 40 MHz to 8 GHz RSA3408A only
The auto calibration for the analyzer with Option 03 (IQ input) needs the
AWG520 waveform generator (Item 4). The waveform files must be installed
from the AWG520 Setup Disk (floppy disk, Item 17, Tektronix part number
063-3680-00) onto the AWG520 hard disk before executing the calibration.
The following two setup files (total about 10 KB) are contained in the setup
floppy disk.
iqgain_i.wfm
iqgain_q.wfm
Copy all the files from the setup disk directory /wca200 to the AWG520
directory /wca200 . For copying files from a floppy disk to AWG520, refer to the
AWG500 Series User Manual .
NOTE
. When you copy the setup files on AWG520, use lowercase letters to enter
the file names.
Setting Up
Waveform Generator
(Option 03 Only)