Lokommander II Next18 ECU
User Manual firmware 5.10.306
Version 0.5.07
Page 6 of 118
1.
Important information
Please read below information before setting up to work
Lokommander II decoders are exclusively designed for model trains. Any other use is forbidden.
Completely remove power (transformer or power supply) when connecting or disconnecting the
decoder.
Avoid mechanical stress or compressed air blows to the decoder board.
Do not remove the heat shrink tube form the board (if present).
Avoid electrical contact of the decoder board and wires (including unused ones) to the locomotive
chassis. Make sure that there are no wires trapped by locomotive transmission system during
reassembly.
Do not solder additional cables other than the needed ones for sound modules or power packs.
Do not wrap the board in any material (like insulating tape). This will cause board overheating.
Connect the wires as described in the user manual. Misusage / misconnection can cause malfunction
of the decoder or can even damage the decoder.
