Lokommander II Next18 ECU
User Manual firmware 5.10.306
Version 0.5.07
Page 89 of 118
CV
Default
Value
Value
Range
Description
122 67
0-255 Decoder Configuration Data 2:
Bit 0 = 0(0): SUSI pins used as PWM Outputs (AUX)
= 1(1): SUSI pins used as SUSI CLK/SUSI DATA
Bit 1 = 0(0): SUSI interface disabled
= 1(2): SUSI Interface enabled
Bit 2 = 0(0): No Load transmission over SUSI
= 1(4): Load transmission over SUSI enabled
Bit 3 = 0(0): Motor PWM weighting OFF
= 1(8): Motor PWM weighting with variation of track voltage
Bit 4,5= 00(0): No Push-Pull operation
= 10(16): Push-Pull operations without intermediate stop enabled
= 01(32): Push-Pull operation with intermediate stop enabled
= 11(48): Not permitted, must be avoided!
Bit 6 = 0(0): FL/RL disabled during firmware update
= 1(64): During Firmware update the FL/RL outputs blinks
Bit 7 = 0(0): n.u.
123 16
0-255 SPP (Smart Power Pack) Timeout = 16ms*Value Ex: = 16ms * 16 = 256ms
124 10
0-255 SPP (Smart Power Pack) start delay in seconds, default value is 10s
125 1
0-255 SUSI wait time
