Tecomec GEOline 8410073, Instruction And User'S Manual

Page: 34 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
33
This user interface environment controls all the activities related to the execution of a treatment
in the field. The function buttons available in this environment are listed below.
Referring the above figures 20,21, representing the two pages according to the control mode
selected (manual or automatic), the following screen areas are represented:
During operation, the following information is shown in this environment:
A. Total treated area (ha) – top left screen area
B. Total sprayed quantity (l) – top left screen area
C. Tank level (l) – top right screen area
D. Current flow rate (l/ha) and set-point (l/ha) – central indicator
E. Current flow(l/min) or current pressure (bar), depending on the setup configuration
(*)
–
left indicator
F. Tractor speed (Km/h) – right indicator
G. General valve status indication (blue: open / grey: closed) – centered icon over the boom
H. Sections valves status indication (blue: open / grey: closed / orange: disabled) – below the
boom icon
I. Manual/automatic mode indication (icon) – left screen area
(*) This label may show the instantaneous flow or pressure according to the current setting of the
“Show press/flow” setup parameter. The value displayed depends also on the sensor currently
installed: if pressure sensor is not installed, this label display the flow value measured, and
pressure is calculated mathematically according to the type of nozzle currently selected
The available keys and their function are described in the following:
Return to HOME page
Tank refill: definition of the quantity of chemical product present in the tank (it must be
greater than 0 to perform a treatment)
Do not spray without liquid in the tank, pump could get damaged, ECU 1224 cannot
avoid it.