Tecomec GEOline 8410073, Instruction And User'S Manual

Page: 26 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
25
Connector distance
(**)
Distance between wheel axis of the
implement and Hitch point point
(mm).
In case of a three-point linkage this
parameter must be 0.
-100,00 ÷ 100,00
Boom distance
(**)
Distance of the bar from the wheel
axis of the towed tool (mm).
In the case of a three-point linkage
point sprayer report distance
between the Boom and the hitch
point
-100,00 ÷ 100,00
Simulated speed (Km/h) Simulated speed value 0,00 ÷ 99,00
Show Press/Flow Selecting data shown in the left
indicator of the WORK environment Pressure
Flow
Manual Mode Type How to operate in manual Rate : The “+ /- “ keys
modify current
setpoint
Direct : the “+ /- “ keys
act directly on the
proportional valve
Prop. Valve low-level Minimum value of the proportional
valve duty-cycle (default: 100
→
10%) Only technical operator should
change this value
0 ÷ 500
PID Type Selecting the sprayer regulation
response.
Response depends on internal
algorithm (PID) parameters (Kp, Ki,
Kd)
AUTO is recommended.
Low: set of
parameters for low
flow rates
Medium: parameter
set for average flow
High: parameter set
for high flow
Custom: User-set
parameters
Auto: ECU
automatically select
best response based