Tecomec GEOline 8410073, Instruction And User'S Manual

Page: 35 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
34
Left side boom sections opening. The opening logic depends on the current configuration
of the “Sections control” setup parameter - standard or extended (refer to section 10.3 Table 11).
•
Standard : opening the last closed valve encountered from the left
Example
Figure 22
•
Extended : Opening the first closed section valve further to the right along the bar
Example
Figure 23
Left side boom sections closing. The closing logic does not depend on the current
configuration of the “Sections control” setup parameter (standard or extended).
Main valve opening/closing. For example, pressing this key when icon is blue, main valve
open.
Increase current flow set-point (l/ha). Note this button is available only when manual mode
is active.
Decrease current flow set-point (l/ha). Note this button is available only when manual
mode is active.
Right side boom sections opening. The opening logic depends on the current configuration
of the “Sections control” setup parameter - standard or extended (refer to section 10.3 Tab. 11).
•
Standard : opening the last closed valve encountered from the right
Example
Figure 24
•
Extended : Opening the first left-hand closed section valve along the bar