Tecomec GEOline 8410073, Instruction And User'S Manual

Page: 27 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
26
on current flow rate
Kp Proportional coefficient of PID
algorithm
(Custom mode)
Only technical operator should
change this value
0 ÷ 500
Ki User-settable PID supplementary
coefficient
(Custom mode)
Only technical operator should
change this value
0 ÷ 500
Kd User-settable PID derivative (Custom
mode)
Only technical operator should
change this value
0 ÷ 500
PID control param Define the parameter used to
control the rate Flow
Pressure
Flowmeter present Thick indicates the presence of the
flowmeter in the control unit yes/no (check box)
Press sensor present Thick indicate the presence of the
pressure sensor in control unit yes/no (check box)
Clock enabled Enables or the use of the date and
time from the tractor Yes/no (check box)
Cust nozzle [1/2] flow
[1/2/3/4/5] Flow associated to the sample point
[1/2/3/4/5] of the custom nozzle 1 or
2
– expressed in l/min
0,000 ÷ 50,000 l/min
Cust nozzle [1/2] press
[1/2/3/4/5] Pressure associated to the sample
point [1/2/3/4/5] of the custom
nozzle 1 or 2
– expressed in bar
0,000 ÷ 100,000 bar
Ignore TC rate If selected, doesn’t accept the rate
set-point received from the Task
Controller
Yes/no (check box)
Auto close main If selected, automatically closes the
main valve when all the section
valves are closed Yes/no (check box)
(*) “Custom 1” and “Custom 2” nozzles characteristics shall be defined by the user by mean of the
“Cust nozzle [1/2] flow” and “Cust nozzle [1/2] press” sample points of the SETUP menu.