ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
16
Figure 9
The speed sensor is provided with a cable terminating with a 3-poles male connector, plug this
connector in the female multi connector cable provided with the ISOBUS ECU 1224 . Sensor input
plug is part of harness Connector C3 (Gray connector 24 pin), Label
“
S
”
Figure 10
The pinout of the female connector provided with the ISOBUS ECU 1224
Table 7
Description
Color
1
GND
BLACK
2
Power
BROWN
3
Signal
BLU
8.2.1 Tips for installation
- Install the sensor at 4-5 mm maximum distance from the nut to be detected.
- Do not install the sensor body too close to other metal objects which could affect the operation
of the detector.
Summary of Contents for GEOline 8410073
