Manuale d’istruzione per l’installazione, la manutenzione e l’uso
Brasiere a gas ribaltabili BS80.G7 / BS8.G7
05.11.02
pagina
59
3.2.1. SWITCH ON, START OF COOKING AND SWITCH OFF
The appliance is equipped with a selector to start all cooking operations (see figure
“Controls”
).
Here is a list of the procedures for a safe and correct use of the appliance.
-
The appliance can be started only once it has been filled.
P
ILOT BURNER LIGHTING
-
Starting from position
press the thermostat knob and turn leftwards to position
; keep the
thermostat knob pressed and press the piezoelectric ignition button several times .
-
Keep the thermostat knob pressed for a few more seconds.
-
Release the thermostat knob and control if the pilot burner is lit.
-
Repeat the operation if the flame turns off.
M
AIN BURNER IGNITION AND TEMPERATURE REGULATION
-
Once the pilot burner has been lit, turn the thermostat knob towards left to the desired temperature. The
thermostat knob is numbered from 1 to 7; the temperatures corresponding to each position are the
following:
Position
1
2
3
4
5
6
7
°C
100
125
150
180
210
250
290
-
The regulation of the thermostat causes the automatic ignition and extinction of the main burner
(ON/OFF regulation); only the pilot flame is lit. When the thermostat knob is turned towards rights to
position
, the main burner is constantly off and only the pilot flame is on.
T
URNING THE PILOT BURNER OFF
-
Press thermostat knob and turn to position
to turn off the pilot burner and prevent the main burner
from lighting.
E
MPTYING THE COOKING VAT
:
-
The tilting of the pan is made by means of an handwheel placed on the RH side of the front panel.
Turning the handwheel clockwise the pan goes up, turning it anti-clockwise the pan goes down.
3.3. CLEANING AND CARE OF THE APPLIANCE
-
The correct operation of the appliance is guaranteed only if these instructions are followed very carefully.
-
Any repairs or maintenance operations must be performed only by qualified technicians. We recommend
to have the appliance controlled at least once a year; for this purpose it is advisable to apply for a service
contract.
-
Keep the thermocouples constantly clean and treat them carefully.
-
Control the burner gas outlet holes periodically. They must always be kept clean.
Do not use aggressive substances or abrasive detergents when cleaning the stainless steel components.
Avoid using metal pads of the steel parts as they may cause rust. For the same reason avoid contact with
materials containing iron.
Do not use sandpaper or abrasive paper for cleaning; in special cases use a powder pumice stone.
In case of particularly resistant dirt, it is advisable to use abrasive sponges (e.g. Scotch-Brite).
It is advisable to clean the appliance only once it has cooled down.
