AutoGRAPH- ST
– Remote Control Command
20
GSMPASS
Command
GSMPASS
Name
Data server password
Supported with firmware
AGST-0.75 and higher
Description
Command is intended to setup a password to access to
the data stored on the server. Password must be exactly
8 characters long and can consist of uppercase and
lowercase letters and figures from 0 to 9.
Command format:
password GSMPASS=gsm_pass;
parameters of the command:
gsm_pass
– a password to access to the server;
Sample command:
5672 GSMPASS=zxcv1234;
Sample reply:
#GSMPASS=zxcv1234;
The device uses password “zxcv1234” to access to data on data server.
