AutoGRAPH-ST
– Remote Control Command
49
Sample command:
5672 SETCP=1,55.173328,61.383743,300,6;
Sample reply:
#SETCP=1,55.173328,61.383743,300,6;
Control of the geofence with a center in 55.173328
°, 61.383743° point is enabled in the
device. When entering to this geofence, the device will send SMS with the current position
data.
Note.
This command is intended for advanced user. So it is recommended to use
AGSTConf software to set up geofence settings.
