AutoGRAPH-ST
– Remote Control Command
47
GPSPERIOD
Command
GPSPERIOD
Name
Data recording period
Supported with firmware
AGST-1.11 and higher
Description
Command is intended for specifying data recording
period.
Command format:
password GPSPERIOD=hour,min;
parameters of the command:
hour,min
– period of data recording. The period must be specified in the following format
hour,minute.
Sample command:
5672 GPSPERIOD=2,0;
Sample reply:
#SECURESETUP=2,0;
The device will record the data every two hours.
