AutoGRAPH-ST
– Remote Control Command
43
SAVECONFIG
Command
SAVECONFIG
Name
Configuration saving
Supported with firmware
AGST-0.75 and higher
Description
Command is intended for saving all new settings which
will be sent to the device after the last restart. If the
settings
haven‟t been saved with this command they will
be valid till the device restart (or restart of GSM modem).
After the restart, all unsaved settings will be reset to last
saved values.
Command format:
password SAVECONFIG=1;
Sample command:
5672 SAVECONFIG=1;
Sample reply:
#SAVECONFIG=1;
Device settings are successfully saved.
