AutoGRAPH-ST
– Remote Control Command
5
Introduction
AutoGRAPH-ST is a thief-alert tracking device that acquires exact position and sends
fixed coordinates to a customer.
The AutoGRAPH-ST provides two modes of operation: Sleep mode and Tracking mode.
The Tracking mode is intended to acquire asset coordinates and transfer them to a data
server or to a customer by email or SMS. To provide a long battery life time, the device
operation is designed in such way that the device is in the Sleep mode most of the time.
The device configuration can be performed by means of the
“AGSTConf” configuration
software or remotely using control commands via SMS or data server.
All SMS commands should be sent to a number of a SIM card installed into the
AutoGRAPH-ST. Reply to the command will be send to a telephone number which sent
this command to the device.
Format of every control command must exactly match the format specified in this User
Manual. Otherwise the
command won‟t be processed.
This User Manual includes a list of remote control commands, short control commands
and a list of messages which the device can send to the customer. Remote control
commands are intended for advanced users who are aware of operation principles of the
AutoGRPAH-ST. For regular setting it is recommended to use short control commands.
