TechnoKom AutoGRAPH STEALTH, Command Manual

Page: 40 / 67

AutoGRAPH-ST
– Remote Control Command
41
ACCLSETUPSEND
Command ACCLSETUPSEND
Name Accelerometer notifications settings
Supported with firmware
AGST-0.75 and higher
Description Command is intended to set up notifications which the
device sends when internal accelerometer triggers.
Command format:
password ACCLSETUPSEND=sms, data,email;
parameters of the command:

sms
– send SMS notification to all telephone numbers, specified in the device, when
accelerometer triggers:
0
– disabled;
1
– enabled.

data
– send all collected data to server when accelerometer triggers:
0
– disabled;
1
– enabled.

email
– send notification to all email addresses, specified in the device, when
accelerometer triggers:
0
– disabled;
1
– enabled.
Sample command:
5672 ACCLSETUPSEND=1,1,0;
Sample reply:
ACCLSETUPSEND=1,1,0;
The device is set up to send SMS notification and data to server when accelerometer
triggers.