AutoGRAPH-ST
– Remote Control Command
31
SMSNUMBERx
Command
SMSNUMBERx
Name
Telephone numbers for sending SMS
Supported with firmware
AGST-0.75 and higher
Description
Command is intended to set telephone numbers which
the device will send SMS to.
Command format:
password SMSNUMBERx=tel_number;
parameters of the command:
tel_number
– a telephone number for sending SMS with current position data.
Telephone number should be specified with prefix
“+7”
х
– an index number of the specified telephone number, from 1 to 3. The device
supports sending SMS to 3 different telephone numbers simultaneously.
Sample command:
5672 SMSN79001112233;
Sample reply:
#SMSN79001112233;
The device is set up to send SMS with current position data to the 79001112233.
