TechnoKom AutoGRAPH STEALTH, Command Manual

Page: 15 / 67

AutoGRAPH- ST
– Remote Control Command
16
BALANCENUM
Command BALANCENUM
Name SIM Balance Checking Settings
Supported with firmware
AGST-0.81 and higher
Description Command is intended for specifying a code for checking
balance of the device SIM card and setting parameters
of notifying about balance state.
Command format:
password BALANCENUM=number,email,sms;
parameters of the command:

number
– a code for checking SIM balance.

email
– sending balance state in Email together with coordinates.
0
– not enabled;
1
– enabled.

sms
– sending balance state in SMS together with coordinates:
0
– not enabled;
1
– enabled.
Sample command:
5672 BALANCENUM=*100#,0,1;
Sample reply:
BALANCE=*100#,0,1;
The device has following settings: the
code “*100#” is used to check balance; balance
state is sent in SMS along with position coordinates.