TechnoKom AutoGRAPH STEALTH, Command Manual

Page: 33 / 67

AutoGRAPH- ST
– Remote Control Command
34
SMSPERIOD
Command SMSPERIOD
Name SMS sending period
Supported with firmware
AGST-0.75 and higher
Description Command is intended to set up a period or time of
sending SMS with current position data to preset
telephone numbers. This command is used to specify
both the period of SMS sending and the exact time of
sending SMS
. In last case the device won‟t send the
data periodically, but will do it every day at scheduled
time.
Command format:
password SMSPERIOD=hours,minutes,type;
parameters of the command:

hours,minutes
– a period or exact time of sending SMS with current position data.
Minimum value is 10 sec, maximum
– 168 hours (or 1 week).

type
– mode of SMS sending:
0
– enables periodical SMS sending with the specified period;
1
– enables everyday SMS sending at the scheduled time.
Sample command:
5672 SMSPERIOD=0,30,0;
Sample reply:
#SMSPERIOD=0,30,0;
The device is set up to send SMS every 30 minutes.