AutoGRAPH-ST
– Remote Control Command
21
SERVEREN
Command
SERVEREN
Name
Data transmission to server
Supported with firmware
AGST-0.75 and higher
Description
Command allows enabling or disabling of data
transmission to the server. If the option is enabled, the
device will switch to the tracking mode and transfer data
to the specified server with preset period or at scheduled
time.
Command format:
password SERVEREN=flag;
parameters of the command:
flag
– specify following value:
0
– to disable data transferring to the server;
1
– to enable data transferring to the server;
Sample command:
5672 SERVEREN=1;
Sample reply:
#SERVEREN=1;
Data transmisison to the server is enabled in the device.
