INTRODUCTION:
The Projection Alarm Clock features manual set time with projection,
12-hour/24-hour option, time alarm with snooze, indoor temperature with
minimum and maximum readings all in a simple, easy-to-read display.
PROJECTION ALARM CLOCK
SETUP INSTRUCTIONS STEP-BY-STEP:
STEP 1:
•
Insert the 4.5 volt AC power adapter into the designated area on the
back of the Projection Alarm Clock.
•
Insert the power adapter plug into a wall outlet for a continuous
backlight and projection.
•
The Projection Alarm Clock will light up and show indoor temperature
and time (12:00).
STEP 2:
(battery-backup operation for power outages)
•
Remove battery cover from Projection Alarm Clock, slide tab down
and pull out to remove the cover.
•
Insert 2 NEW AAA batteries (not included) into the back of the
Projection Alarm Clock. Observe the correct polarity (see marking
inside the battery compartment).
•
Note:
Backlight and projection will not display constantly when
operating on battery power. They will appear for 3 seconds when the
SNOOZE/LIGHT button is pressed.
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable
Batteries
PROGRAM MENU:
TIME SET:
Be sure the Time is showing or
press and release the MODE button to move
to Time Mode.
•
12/24 HOUR TIME
: With time displayed,
hold the SET button and 12Hr will flash.
Press and release the UP or DOWN button
to select 24Hr. Confirm with the SET button and move to the hour.
•
HOUR
: The hour will flash. Press and release the UP or DOWN
button to select the correct hour. Confirm with the SET button and
move to the minutes.
•
MINUTES
: The minutes will flash. Press and release the UP or
DOWN button to adjust the minutes. Confirm with the MODE button to
exit time set.
CALENDAR SET:
From Time Mode, press and release the MODE
button twice to move to Calendar Mode. The
year will show in the time area.
•
YEAR
: Hold the SET button to enter
Calendar Set. The year will flash. Press and
release the UP or DOWN button to select the
correct year. Confirm with the SET button
and move to the month.
•
MONTH
: The month will flash. Press and release the UP or DOWN
button to select the correct month. Confirm with the SET button and
move to the date.
•
DATE
: The date will flash. Press and release the UP or DOWN button
to select the correct date. Confirm with the MODE button to exit
calendar set.
Note:
The weekday will set automatically as you set the year, month
and date.
ALARM SET:
From Time Mode, press and
release the MODE button once to move to
Alarm Mode. The alarm time will show in the
time area and the letters
AL
will show next to
the temperature.
•
ALARM HOUR
: Hold the SET button to enter Alarm Set. The hour will
flash. Press and release the UP or DOWN button to select the correct
hour. Confirm with the SET button and move to the minutes.
•
ALARM MINUTES
: The minutes will flash. Press and release the UP
or DOWN button to adjust the minutes. Confirm with the MODE button
to exit.
ALARM ON/OFF
:
Press and release the MODE button to move to Alarm Mode (AL).
•
ON:
With the Alarm time showing, press and release the UP button to
activate the alarm. When the alarm is active the alarm icon will
display in the upper left corner.
•
OFF:
With the Alarm time showing and alarm is active, press and
release the UP button to deactivate the alarm. The alarm icon will not
appear when the alarm is inactive.
SNOOZE:
•
When the alarm sounds, press the SNOOZE/LIGHT button to trigger
snooze alarm for 4 minutes. The snooze icon
Zz
will flash after the
hour.
•
Press any button to turn off the snooze feature when the snooze
alarm sounds. The snooze icon will disappear.
BACKLIGHT:
•
Battery Power:
Press and release the
SNOOZE/LIGHT button on the
top of the projection clock to
show the backlight for 3 seconds.
Note:
Backlight will not display constantly when operating on battery
power.
•
A/C Power
: Backlight is displayed constantly.
PROJECTION:
TIME will project continually when operating with the a/c power cord.
YEAR will project for about 30 seconds when in Calendar mode.
ALARM TIME will project for about 30 seconds when in Alarm mode.
TIME
YEAR
ALARM
•
Battery Power:
Press and release the
SNOOZE/LIGHT button to
show the projection for 3 seconds.
Note:
Projection will not display constantly when operating on battery
power.
•
A/C Power
: Projection is displayed constantly.
Focus Projection:
Use the focus wheel on the back of the
projection arm to focus the projection image. Aim the
projection on the wall or ceiling 2-6 feet away for best
projected image.
Projection Alarm Clock
with Indoor Temperature
Model: W85923 | Quick Setup Guide
