•
Projection Arm
: The projection arm will rotate 180 degrees to allow
you to project on the wall or ceiling. Adjust the focus of the projection
with the focus wheel on the back of the projection arm.
Projection Arm Rotates
FAHRENHEIT/CELSIUS:
From a normal display (time showing), press
and release the SET button to switch from Fahrenheit to Celsius.
MAX/MIN RECORDS:
•
VIEW:
Press and release the MAX/MIN button to view the minimum
then maximum indoor temperature.
•
MANUAL RESET:
The Minimum and maximum value will reset
independently.
o
Press the MIN/MAX button to view either the minimum or maximum
temperature.
o
Press the DOWN button to reset the value. You will see dashes for
about five seconds then the minimum or maximum value reset will
display current temperature as the new min/max value.
RESET BUTTON:
If the clock display appears distorted or is not responding to buttons, use
a pen or paperclip to press and release the RESET button one time.
This will reset the Projection Alarm Clock to default settings.
CARE AND MAINTENANCE:
•
Do Not Mix Old and New Batteries
•
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
•
Do not expose the Projection Alarm Clock to extreme temperatures,
vibration or shock.
•
Keep the Projection Alarm Clock dry.
•
Clean the Projection Alarm Clock with a soft damp cloth. Do not use
solvents or scouring agents.
•
The Projection Alarm Clock is not a toy. Keep it out of reach of
children.
•
The Projection Alarm Clock is not to be used for medical purpose or for
public information, but is determined for home use only.
•
Improper use or unauthorized opening of housing will void the
warranty.
•
If the Projection Alarm Clock does not work properly, change the
batteries and/or check the a/c cord connection.
SPECIFICATIONS:
Indoor
:
Temperature Range: +32 °F to +122°F (0°C to 50°C)
Power:
Projection Alarm Clock:
4.5-volt a/c power adapter (included)
Optional 2-AAA, IEC, LR3 batteries (not included)
Battery Life:
Projection Alarm Clock
Battery Backup: Battery life is over 24 months when using the AC
adapter for primary power
Dimensions:
Projection Alarm Clock:
5.91” L x 2.17” W x 4.33” H
(150 x 55 x 110 mm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product
against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on
products purchased and used in North America and only to the original purchaser
of this product. To receive warranty service, the purchaser must contact La
Crosse Technology, Ltd for problem determination and service procedures.
Warranty service can only be performed by a La Crosse Technology, Ltd
authorized service center. The original dated bill of sale must be presented upon
request as proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at
no charge as stipulated herein, with new or reconditioned parts or products if found
to be defective during the limited warranty period specified above. All replaced
parts and products become the property of La Crosse Technology, Ltd and must
be returned to La Crosse Technology, Ltd. Replacement parts and products
assume the remaining original warranty, or ninety (90) days, whichever is longer.
La Crosse Technology, Ltd will pay all expenses for labor and materials for all
repairs covered by this warranty. If necessary repairs are not covered by this
warranty, or if a product is examined which is not in need or repair, you will be
charged for the repairs or examination. The owner must pay any shipping charges
incurred in getting the La Crosse Technology, Ltd product to a La Crosse
Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay
ground return shipping charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused by
accident, unreasonable use or neglect (including the lack of reasonable and
necessary maintenance); (2) damage occurring during shipment (claims must be
presented to the carrier); (3) damage to, or deterioration of, any accessory or
decorative surface; (4) damage resulting from failure to follow instructions
contained in the owner’s manual; (5) damage resulting from the performance of
repairs or alterations by someone other than an authorized La Crosse Technology,
Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference.. This warranty
covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments,
claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR
PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF
CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights
specific to the State. Some States do not allow the exclusion of consequential or
incidental damages therefore the above exclusion of limitation may not apply to
you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is available at:
www.lacrossetechnology.com/w85923
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
FCC Disclaimer:
This Device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) the device must accept any interference received, including interference that
may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY
TO OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form, even in
excerpts, or duplicated or processed using electronic, mechanical or chemical
procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this
handbook is regularly checked and corrections made in the next issue. We accept
no liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.