TechnoKom AutoGRAPH STEALTH, Command Manual

Page: 39 / 67

AutoGRAPH- ST
– Remote Control Command
40
ACCLSETUPLEV
Command ACCLSETUPLEV
Name Accelerometer settings
Supported with firmware
AGST-0.75 and higher
Description Command is intended to configure the device
accelerometer.
Command format:
password ACCLEN= scale,threshold;
parameters of the command:

scale
– accelerometer range:
0
– +/-2g;
1
– +/-4g;
2
– +/-8g;
3 - +/-16g;

threshold
– motion detection level, providing sending the notification to a customer, if
an affect detected by accelerometer is higher than the specified threshold. The threshold
must be specified in mg.
Sample command:
5672 ACCLSETUPLEV=0,1062;
Sample reply:
ACCLSETUPLEV=0,1062;
The device accelerometer has following settings: measuring range is +/-2g, detection
threshold
– 1062mg.