35
TEC-67231-2 Technical description Prizrak-8xx BT
4
Select a desired menu option by pressing and releasing the programming button the number of times that corresponds to a required
option number. the alarm will indicate a selected menu option by a series of beeps and LED flashes. If the option number is a two digit
number: tens – a long beep, ones – a short beep. E.g.:
•
the option №10 indication
– one long beep;
•
the option №11 indication
– one long beep, 1 sec. pause, one short beep.
5
Press and hold the brake pedal to change the option value. The alarm will indicate the current option value setting by a series of beeps
and LED flashes, the beeps length will change.
6
Press the programming button (or the integrated Key-ID button) the number of times required to advance from the current value to a
desired one. Keep in mind that after the last option value goes the first one.
7
Release the brake pedal. Now it is possible to choose another option number or exit the programming menu.
8
In order to shift from the current option number to a desired one-press and release the programming button (or the Key-ID button) the
number of times required to advance from the current option number to a desired one. E.g. to advance form the option №2 «AntiHiJack»
to №8 «CDL latc
h when driving off» press and release the programming button 6 times (or the Key-ID button).
To finish programing and exit the programming menu just simply turn the ignition OFF, confirmation trill will sound. The alarm will automatically
exit the programming menu if within 60 seconds no actions are performed and the brake pedal is not pressed.
It is allowed to enter the default PIN code «2» with the built-in programming button for authentication if a vehicle hasn’t covered 10 km
after the alarm installation and the default PIN code hasn’t been changed.
PUK code is required In order to change the authentication method (the option №12): it is hidden under the protective layer on the plastic
card (quick reference card). There is no sonic indication while entering the PUK code digits, the confirmatory trill will only sound if the PUK code
has been entered correctly. After that the alarm will indicate the current option value with a relative series of beeps.
PUK code is not required if:
1
The vehicle hasn’t travelled 10 km after installing the alarm system («Speed monitoring» feature is available and enabled);
2
If the vehicle’s ignition hasn’t been switched ON during 20 minutes constantly after the alarm installation (if «Speed monitoring»
is not supported by the vehicle or is disabled in the alarm settings).
Registering new radio tags
New radio tags registration
Programm all desired radio tags within one procedure. The radio tags that are not taking part in programming will be erased form the alarm’s
memory.
Registration sequence
1
Use one of the radio tags for authentication. Disassemble all the other radio tags and take the batteries out of them beforehand. In case
if for authentication the radio tag is not required (For authentication is used PIN code or PUK code) — take the batteries out of each radio
tag.
2
Perform the authentication procedure. The alarm will emit the confirmatory trill indicating that the authentication is successful.
3
Press and release the programming button 12 times, the alarm will emit 4 short beeps and 4 LED blinks.
4
Press and release the programming button 14 times, the alarm will emit series of 1 long and 4 short beeps.
5
Press and hold the brake pedal. the alarm will indicate the number of already registered radio tags by series of beeps and LED flashes.
The number of emitted beeps indicates the number of stored tags in the system’s memory.
6
Place a battery into one of the radio tags. Wait for short intermittent beeps that signifying that the radio tag registration procedure has
started. After a radio tag has been successfully registered the alarm will indicate the total number of radio tags programmed into the
system’s memory by series of beeps and LED flashes. Make sure the number of indicated beeps and LED flashes matches the number
of registered tags. If an error occurs during the «registration» procedure the long warning beep will sound and the alarm returns to the
total number of registered tags indication.
7
Insert the battery into the next radio tag, wait until the tag is registered, repeat the steps described above if more radio tags are planned
to be registered.
8
Release the brake pedal and turn the vehicle’s ignition OFF after the last radio tag has been registered, the confirmatory trill will follow.
Testing detection quaility of a radio tag
Perform this procedure when the engine is running. It is recommended to slightly increase and decrease the engine’s RPM while testing the
radio tags.
Testing procedure
1
Complete authentication. The alarm will emit the confirmatory trill indicating that the authentication is successful.
2
Press and release the programming button 12 times, the the alarm will emit 4 short beeps and 4 LED blinks.
3
Press and release the programming button 15
times, the alarm will emit 1 long and 5 short beeps to indicate that the option №15 of the
programming memu has been successfully selected.
4
Press and release the brake pedal during 10 seconds until a sonic signal is sounded. Release the brake pedal. the alarm will turn on the
constant radio tag search mode.
5
Verify the radio tag detection quality by moving the radio tag to different places of the vehicle’s interior.
6
The confirmatory trill emitted every 3 seconds indicates the reliable radio tag detection.
7
To exit the option «Radio tag detection quality test» press the brake pedal or simply turn the ignition OFF.
Changing PIN code
1
Turn the vehicle’s ignition off.
2
Complete authentication.
3
Within 10 seconds after the authentication press and release the programming button 14 times. The alarm will emit one beep and LED
flash to confirm that the «PIN code change» mode has been successfully entered.
4
Set up the new PIN code. Any button of the vehicle that responds with beep when being pressed can be used to set up the new PIN-code
combination.
5
Wait for confirmation: 1 beep and LED flash.
6
Repeat the new PIN code.
7
Wait for confirmation:
