TEC Prizrak-810 BT, Technical Description

Page: 15 / 43

15
TEC-67231-2 Technical description Prizrak-8xx BT
Wire harness description
Alarm inputs/outputs assignment is described in the Table 4. Connectors pin numeration is shown in figure 1. Inputs/outputs adjustment is
carried out in the programming menu (see section «Hardware functions configuration»).
Figure 1. Connectors pin numeration, view from the wire harness side
Table 5. Wire harness descriptio
№ Wire colour Wire type Wire function Current, mA
Х1 (24-pin)
1 Grey/blue DATA2 (RX) Immo/ LIN/ ComfortControl Mazda/CDL control on Mazda –
2 Yellow TP-BUS
Digital data bus. Designed for connection of ECM-250,
GPS/GLONASS-270, HCU-230
–
3 Black
Temperature
sensor (-)
External temperature sensor (TEC-0077-16) –
4 Green
Programmable
output (-)
CDL alternative control (Lock — for a double wire control/lock and
unlock for a single wire control)
300
5 Blue
Programmable
output (-)
CDL alternative control (Unlock — for a double wire control) 300
6 White/black
Programmable
output (-)
Wired engine locking control 300
7 Blue/red
Programmable
output (+/-)
Hazard lights alternative control 300
8 Brown CAN2 CAN2-L
9 Brown CAN1 CAN1-L
10 Grey/black
Programmable
input (-)
Refference ground/Digital negative button
11 Yellow/red FSK Communiacation channel with the relay pLine
12 Black Power GROUND System power source GROUND
13 Grey/green DATA2 (TX) Immo/LIN/ ComfortControl Mazda/CDL control on Mazda
14 Blue/yellow LIN
An aftermarket heater control via (Webasto, Eberspächer) data bus
«Wbus» protocol
15 Black/white
Temperature
sensor (+)
External temperature sensor (TEC-0077-16)
16
Orange/
green
Programmable input/
output (-)
Driver’s door opening imitation/Driver’s door pin switch input
17 Green/black
Programmable
input (-)
Hood
18 Pink/green
Programmable
input (+)
Brake pedal position monitoring
19 White/red
Programmable
input (+)
Vehicle’s OEM alarm panic
20 Brown/yellow CAN2 CAN2-H
21 Brown/red CAN1 CAN1-H
22 Grey/yellow
Programmable
input (+)
Analog button/Digital positive button
23 Pink /black
Programmable output
(+/-)
Siren control (supplied with the alarm) 1300/150
24 Red Power +12 V System power 12 V
Х2 (6-pin)
1 Yellow/white
Programmable
output (+)
ACC (remote start) 300
2 Yellow/black
Programmable
output (+)
Ingnition 2 (remote start) 300
3 Yellow/red
Programmable
output (+)
Starter motor (remote start) 300
4 Yellow/green
Programmable
output (-)
Key is in ignition switch (remote start) 300
5 Yellow
Programmable
output (+)
Ignition (remote start) 1200
6 Yellow/blue
Programmable
output (-)
OEM immobiliser bypass module activation (remote start) 300
Х3 (8-pin)
1 Green/red
Programmable
input (-)
Trunk
2 Orange/white
Programmable
input (-)
Other doors
1
13 24
12
X4 X1
X2
Microphone
1
4 6
3
X3
1
5 8
4
GPS/Glonass-270
1
3 4
2
2
1