Team SILK AX14-60, Instruction Manual

Page: 32 / 92

AX14-60 Flange Facing Machine
31
2. Fit the central location spigot to the bottom of the turntable base; secure using 2
Off M6 CSK socket head screws.
3. Carefully position the machine onto the base and if fitted locate the centre
location spigot into the centring hole. (Fig.15).
Fig. 15 Removal of the location spigot
4. If a greater degree of accuracy is required, for example when re-machining a
'V' groove. Remove the nylon location spigot from the bottom of the machine
before mounting onto the base assembly. Mount the drive assembly onto the
base and lightly secure using the four shouldered bolts. This allows the
machine to be moved until it is accurately centred to the groove. Once centred,
tighten the four shouldered bolts evenly and re-check the concentricity.
Fig. 16 Locating the machine to the base
Nylon location
spigot
Air exhaust
blanking caps