Team SILK AX14-60, Instruction Manual

Page: 49 / 92

AX14-60 Flange Facing Machine
48
7.4.5 Toolpost
To remove:
1. Observe all Warnings and Cautions; refer to sections 3.1 and 7.4.
2. Support the tool post and remove the toolpost stop screw.
Fig. 26 Toolpost
3. Carefully remove the toolpost assembly from the surfacing arm and place in a
safe location.
4. If required, the toolpost carriage can be removed from the surfacing arm as
follows:
a. Slacken gib strip screws.
b. Remove the four screws from the carriage nut.
c. Slide off the carriage and remove from the surfacing arm.
To refit:
The procedure for fitting the toolpost to the surfacing arm is the reverse of the
removal procedure.
Toolpost stop
screw
Toolpost
carriage